86-15852949220      mt@alasmachinery.com
NANJING ALAS INTERNATIONAL CO., LTD
You are here: Home » Products » Crusher Blade & Chipper Blade & Shredder Blade » Plastic Crusher & Granulator Blades » Beside-the-Press Granulator Bed Knives & S-Type Hook Blades
Contact Us

loading

Share to:
sharethis sharing button

Beside-the-Press Granulator Bed Knives & S-Type Hook Blades

Consumable Formats: High-frequency wear-replacement stator bed knives (counter blades) and S-type moving hook claws.
Metallurgical Profiles: Direct-milled from certified cold-work steel plates (SKD11 / Premium DC53). No casting reclamation.
Hardness Classifications: Standard SKD11 locked at 58–60 HRC; Premium DC53 matrix steel locked at 60–62 HRC for enhanced toughness.
Fitment Versatility: In-stock replacements for mainstream brand granulators, delivering a repeatable 0.1 mm cutting clearance.
  • ALAS

  • L/C, T/T, Paypal, Money Gram

  • 5

  • Wooden Crate Packaging

Availability:
Quantity:

1. Product Performance Summary

Chamber view of an operational beside-the-press slow-speed granulator featuring staggered rotor teeth intermeshing with bed stator knives at 0.1mm clearance.

Application Scope: High-frequency wear-replacement consumables engineered specifically for beside-the-press low-speed granulators operating at a stabilized 25–35 RPM range.

Geometrical Precision: Ground to ≤ 0.02 mm/m face flatness in a free, un-clamped state, with parallelism locked under < 0.02 mm. This micro-tolerance prevents axial wobble, edge rolling, and friction-induced polymer melting.

Quality Assurance: Every batch is shipped with traceable Positive Material Identification (PMI) spectrum chemistry reports and certified Rockwell hardness mapping logs to ensure assembly consistency.

2. Bed Knives & Hook Blades Selection Matrix

This selection matrix covers standard stock configurations for rapid verification. To ensure precise cutting execution, recommended initial running clearances are cross-linked to specific waste profiles. For non-standard or modified lines, custom manufacturing is fully supported via technical blueprints, sketches, or worn samples.

ALAS replacement low-speed granulator consumable kit featuring one S-type moving hook blade and two matching precision-ground bed stator knives.

Blade Type

Common Thickness

Target Interface

Target Output Size

Main Application

Recommended Clearance

S-Type Hook Knife

10 mm / 15 mm / 20 mm

Integrated Spline / Hex-Bore

4 mm – 8 mm Granules

Rigid PC, PMMA, and Nylon (PA) sprues, rejects, and thick-walled runners.

0.10 mm – 0.15 mm (Calibrated for rigid sprues)

Staggered Claw Cutters

15 mm / 25 mm / 30 mm

ISO H7 Finish-Broached Keyways

6 mm – 10 mm High-Purity Regrind

Glass-filled polymers (e.g., PA66+GF30), ABS, and PBT automotive molding rejects.

0.08 mm – 0.12 mm (Tighter limits for abrasive fiber)

Rotor Side Cutters

12 mm / 18 mm

Counterbored Bolt Channels

Edge-Trimming Clearance Control

Thin packaging films, PP woven bags, and flexible thermoforming stretch wrap.

0.03 mm – 0.05 mm (Ultra-tight limits to stop film bypass)

Bed Stator Knife

20 mm / 35 mm / 40 mm

Flat Slot with T-Shape Keyway

Fixed Clearance Reference Line

Universal stationary counter-shearing seat across beside-the-press mills.

Baseline Reference (Adjusted via graded shims)

Digital caliper quality inspection checking a finished 20.00 mm thickness S-type granulator hook blade at the ALAS manufacturing facility.

3. Stator Bed Knife Installation & Gap Alignment Protocol

The clearance balance between the bed stator knife and moving rotor blades governs shearing quality, with a mandatory wear criterion defining blade replacement at > 0.3 mm cumulative edge recession or > 0.5 mm chipping depth. Maintenance technicians must adhere to this optimized sequence:

Lockout/Tagout & Residual Energy Release (LOTO): Disconnect main power, tag the breaker, vent hydraulic/pneumatic circuit pressure, and engage a mechanical rotor locking pin to ensure zero energy state before chamber entry.

A pair of finished premium DC53 granulator bed stator knives resting on a workshop surface, featuring ground flat interfaces under 0.02mm/m flatness.

Seat Preparation: Clean blade seats thoroughly using a wire brush and dry compressed air to prevent micro-fines from inducing geometric warping during tightening.

Torque Fastening: Position the new knife with anti-seize lubricant, applying cross-diagonal torque: 200–280 N·m for M18+ fasteners, and factory reference values for M10–M14 sizes.

Multi-Point Clearance Measurement: Rotate the shaft manually and measure horizontal side clearance across 5–8 equidistant check-points along the span.

Gap Calibration: Set baseline gaps per material (0.03–0.05 mm for films vs. 0.10 mm for rigid resin). Use 0.01–0.02 mm shims if check-point variation exceeds 0.03 mm.

Quantitative Verification Testing: Conduct a 2-minute idle test ensuring bearing temperature < 60°C, silent contact, and current within ±5% baseline, followed by a 5-minute trial feed achieving ≥ 95% particle uniformity.

Technical FAQ

Q1: Why is the hardness of your SKD11 blades specified at 58–60 HRC rather than 68 HRC?

A: Traditional cold-work SKD11 (AISI D2) steel achieves its optimal balance of wear resistance and anti-chipping strength between 58–60 HRC after proper vacuum quenching and multiple tempering cycles. Claims of "68 HRC" on solid, standard tool steels are highly inaccurate. While specific cobalt-bearing high-speed steels (HSS) or premium powder metallurgy grades can safely lock in at 65–67 HRC for specialized micro-cutting, true 68 HRC and above belongs strictly to brittle solid tungsten carbide matrices or specialized hard surface deposition treatments. Running a solid cold-work alloy blade at an artificial, brittle hardness level would cause the S-type hooks and bed knives to shatter the instant they encounter an un-melted engineering plastic lump or cyclic torque shock loads.

Q2: Our beside-the-press shredder is generating excessive fines that clog our injection gates. Is this caused by the bed knife?

A: Yes, for rigid polymer applications, this is heavily driven by uncalibrated clearance or a blunt edge profile. In rigid sprue processing lines (e.g., solid PC, ABS, or Nylon runners), when bed knives wear down or their horizontal gap expands beyond 0.2 mm, the material is no longer sliced cleanly via scissor-action shearing. Instead, the rigid plastic is compressed and crushed between the moving claws and the stator bed, shattering the polymer matrix and creating micro-fines. Upgrading to flatness-controlled bed knives (≤ 0.02 mm/m) and resetting the clearance to a strict 0.1 mm shearing line restores regrind particle integrity. (Engineering Notice for Flexible Films/Woven Bags: For soft polyolefins, textiles, and thin stretch films, material wrapping and torque spikes occur instead of shattering if clearances open up. Flexible film lines require tight, highly continuous clearance mapping customized down to the film's micrometer resilience limit via graded shims).

Q3: What are the specific risks of dry-grinding during stator resharpening, and what is the wear limit?

A: Dry resharpening spikes the cutting apex temperature above 250°C instantly. This triggers localized thermal annealing, alters the tool steel's microstructure, and reduces the edge hardness to an unhardened core layer below 40 HRC. When reinstalled, this soft edge rolls over within hours of operation, spiking the drive torque and causing the polymer to melt onto the shaft from friction. Constant, high-volume fluid flood cooling is mandatory during all sharpening procedures within our verified process limits.

ALAS Wear Limit Guide: Schedule a routine maintenance resharpening immediately when unilateral edge radius recession exceeds 0.3 mm, or when the axial stack alignment deviation across the interlocking assembly exceeds 0.03 mm. This specific criteria ensures predictable edge restoration without compromising deep through-hardened matrix integrity or altering the baseline lateral shearing clearance.

High-volume flood fluid coolant applied during the precision cylindrical grinding process of an ALAS S-type granulator hook blade edge apex to prevent thermal annealing.

Q4: We do not have the original machine blueprints. Can you duplicate bed knives for older Wittmann or Shini granulators?

A: Yes. Over 70% of our consumable production involves reverse-engineering legacy equipment. We can process a worn sample tool (even with minor edge damage), an old technical data sheet, or a dimensioned hand sketch. Our engineering department will generate a custom CAD blueprint with optimized hook geometries for your evaluation and formal sign-off before manufacturing begins.

Frustrated with Excessive Fines, Edge Rolling, or Polymer Melting?

Upgrade to ALAS precision-ground bed knives and S-type hook claws. Contact our team for a free metallurgical report, precision OEM-matched fitment verifications, and a factory-direct quote.

Previous: 
Next: 
ALAS - Trust-Worthy Industrial Machinery Tooling Partner Logo
Phone:
86-15852949220
Address:
Jiangning District, Nanjing
About Us

Nanjing Alas International Co., Ltd. is a professional industrial tooling manufacturer focused on shear blades, bending dies, shredder blades, and custom wear parts. We offer full application engineering, material selection, setup guidance, and after-sales support to global customers.
Tell us your requirements, and our engineering team will provide professional solutions for blade specification, tool life optimization, and cost-effective production.

Subscribe
Sign up for our newsletter to receive the latest news.
Copyright © 2021-2026 NANJING ALAS INTERNATIONAL CO., LTD 苏ICP备2021025144