ALAS
Nanjing, China
L/C, T/T, Money Gram
Wooden Crate Packaging
| Availability: | |
|---|---|
| Quantity: | |
The Challenge: Continuous friction against cellulose fibers causes generic blades to blunt rapidly during high-speed rewinding. This wear leads to ragged edges, high dust/lint accumulation, and unexpected web breaks.
Our Solution: ALAS fabricates high-diameter circular knives and log saw blades using four precision-matched steel grades: solid M2 HSS, Tungsten Carbide (TCT) inlays, AISI D2, and Cr12. Processed via CNC multi-axis grinding to a thickness tolerance of ±0.002 mm, these tools maintain strict edge geometry to minimize paper dust on facial tissue, multi-ply rolls, and non-wovens.
M2 HSS / SKH51 (62–65 HRC): Built for high-speed automated lines (300–800 m/min). High red hardness maintains edge geometry under friction heat, minimizing paper lint.
Tungsten Carbide Inlaid (89–92 HRA Edge): Designed for heavy-ply towel rewinding or high-volume packaging tissue. Ultra-fine grain carbide vacuum-brazed to a backing plate extends wear life up to 10x.
AISI D2 / SKD11 (59–62 HRC): Selected for mid-speed lines processing recycled paper, heavy-ply kitchen stock, or core-winding cardboard containing micro-sand impurities.
GB Cr12 / DIN 1.2080 (58–61 HRC): Economical baseline grade for low-speed slitting (<150 m/min), manual trimming, or budget-restricted workshops.
Converting Line Configuration | Target Tissue / Substrate Stock | Recommended Knife Grade | Hardness Range | Engineering Selection Logic |
|---|---|---|---|---|
High-Speed Continuous Line (>300 m/min) | Lightweight facial tissue, napkin web stock, cellulose hand towels | Refined AISI M2 HSS (Solid) | 62–65 HRC | High thermal red hardness prevents edge rolling caused by friction heat. |
Heavy-Duty High-Volume Rewinding | Multi-ply kitchen towel rolls, structural non-woven hygienic stock | Tungsten Carbide Inlaid Alloy | 89–92 HRA (Edge) | Ultra-fine grain carbide prevents microscopic adhesive edge wear during long-duration runs. |
Mid-Velocity Slitting Line (150–300 m/min) | Recycled paper stocks, dense multi-ply rolls, core paper | Premium AISI D2 Tool Steel | 59–62 HRC | Cold-work alloy resists edge micro-chipping caused by recycled paper impurities. |
Low-Speed / Manual Operations (<150 m/min) | Standard daily towel rolls, basic cardboard, manual trimming | Economical GB Cr12 Alloy Steel | 58–61 HRC | A cost-effective cold-work option for routine slitting where budget is the primary constraint. |
A: High paper dust and airborne lint indicate that the cutting edge has suffered radius rollover or that axial runout is crushing rather than shearing the paper fibers. Dull tools tear the cellulose structure, releasing loose fibers. ALAS controls radial and face runout under 0.003 mm using multi-stage vacuum heat treatment and CNC dual-axis grinding. This precise geometry minimizes friction and limits dust generation to maintain a clean production environment.
A: Recycled paper stocks contain abrasive mineral fillers, chemical coatings, and residual micro-sand particles that rapidly blunt standard steel edges. Selection should be based on your line speed and budget:
Under 150 m/min (Low-Speed Lines): Deploy GB Cr12. It serves as a cost-effective, standard cold-work grade for basic daily trimming operations.
150 to 300 m/min (Medium-Speed Lines): Upgrade to AISI D2. It provides a tougher, chipping-resistant cold-work base that handles recycled paper impurities better than Cr12.
300 to 800 m/min (High-Speed Automated Lines): Upgrade to vacuum-quenched M2 High-Speed Steel (HSS) or Tungsten Carbide (TCT) Inlays. These options deliver the thermal red hardness and wear resistance required to withstand continuous micro-abrasion without premature dulling.
A: Implement light maintenance grinding before severe edge notches or radius deformation exceeding R 0.5 mm develop. Operating dull knives overloads machine spindles and increases the steel removal required during sharpening.
Recommended Metal Removal per Pass:
M2 HSS & AISI D2: Use a fine-grit CBN wheel under continuous flood cooling, removing only 0.01 mm to 0.03 mm
of steel to clear the fatigue layer.
GB Cr12: Use a standard Al2O3 or CBN wheel with a pass depth of 0.03 mm to 0.05 mm.
Post-Grind Requirement: Always follow the grind with side-flank relapping to maintain a uniform surface finish and ensure optimal cutting edge geometry.
ALAS manufactures high-diameter paper converting knives and log saw blades tailored for standard pneumatic knife holders and high-speed tissue converting arbors:
Log Saw Blades: Outer Diameter (OD) from 610 mm to 1000 mm, with thickness tolerances maintained strictly within ±0.005 mm to eliminate high-speed axial drift.
Circular Slitter Knives: Outer Diameter (OD) from 100 mm to 450 mm, available in single-bevel or double-bevel configurations with custom drive keyways.
System Integration: Fully compatible with universal pneumatic score-cut or shear-cut slitting systems, with custom positioning pinholes manufactured strictly to your blueprints.
Our blades utilize anti-rust VCI barriers and ISPM-15 compliant wooden crates to ensure safe overseas delivery.
Our blades integrate seamlessly with major converting lines like PCMC, Fabio Perini, and Baosuo for high-speed tissue processing.
Request a Tissue Converting Tooling Solution to Eliminate Airborne Paper Dust!
Eliminate airborne paper dust, unexpected web breaks, and ragged edge burrs on your high-speed rewinding lines. Submit your exact machine OEM model numbers, target tissue basis weight, and dimensional requirements to receive a certified custom metallurgical blueprint and a factory-direct wholesale quotation within 24 hours!
Nanjing Alas International Co., Ltd. is a professional industrial tooling manufacturer focused on shear blades, bending dies, shredder blades, and custom wear parts. We offer full application engineering, material selection, setup guidance, and after-sales support to global customers.
Tell us your requirements, and our engineering team will provide professional solutions for blade specification, tool life optimization, and cost-effective production.
