Custom Ironworker Tooling & Non-Standard Punch Die Engineering
ALAS
Nanjing, China
T/T, Money Gram
Wooden Crate Packaging
Product Description
1. Manufacturing & Processing Capabilities
We machine our non-standard tooling lines through strict metalworking procedures inside the ALAS Nanjing facility. We execute multi-axis CNC machine setups and specialized bench finishing to control core part density and tool longevity.
Billet Forging & Solidification: We execute cross-directional hammer forging on all tool steel blanks to break up raw carbide segregation and close down micro-porosity before rough cutting.
CNC Flange & Shank Turning: We run multi-axis turning centers to turn precise shank profiles, parallel flange seating faces, and shoulder transitions within strict positioning tolerances.
Oblong Profile CNC Milling: We deploy vertical machining centers to mill direct structural obround shapes, straight slot profiles, and asymmetrical relief tracks directly onto the custom tool blanks.
Atmosphere-Controlled Vacuum Hardening: Our technicians balance structural core toughness and working surface hardness through multi-stage preheating, automated vacuum gas quenching, and sub-zero tempering treatments.
2. Punch Material Grade & Application Performance Matrix
All stroke statistics represent standard resharpening intervals under specified workpiece thicknesses and ambient operations.
9CrSi Tool Steel (General-Purpose Entry-Level)
Hardness Range: 55–58 HRC (Stable baseline hardness engineered for general fabrication)
Standard Workpiece Bounds: ≤5 mm structural mild steel stock.
Sharpening Cycle Lifespan: 1,500 to 3,000 cuts before a routine regrinding cycle.
Workshop Reality & Bounds: Supports occasional heavy piercing up to 15mm; however, structural over-tonnage stress will rapidly dull the edge and collapse life down to 500–1,000 strokes.
Best Shop Adaptation: Light-duty fabrication, intermittent small batches, and cost-sensitive general maintenance.
AISI D2 / SKD11 (Continuous Mass Production Standard)
Standard Workpiece Bounds: ≤10 mm structural carbon steel (Q235/A36).
Sharpening Cycle Lifespan: 3,000 to 6,000 cuts on 10mm structural profiles; up to 10,000 hits on thin sheet blanking.
Workshop Reality & Bounds: Continuous heavy hydraulic piercing on plates exceeding 10mm raises edge-chipping risks due to traditional material alloy brittleness.
Best Shop Adaptation: Daily high-frequency production of standard structural angles, channels, and flat bar plates.
Standard Workpiece Bounds: 8 mm to 15 mm heavy alloy and structural plate lines.
Sharpening Cycle Lifespan: 8,000 to 10,000 cuts under severe 15mm heavy hydraulic impacts.
Workshop Reality & Bounds: Computer-controlled vacuum heat treatment eliminates internal stress and doubles the impact toughness of D2, completely preventing micro-chipping under sudden tonnage shock.
Best Shop Adaptation: Heavy continuous blanking, high-tensile structural frames, bridge gussets, and industrial machinery chassis lines.
3. Custom QA & Drawing Alignment Verification
We do not run standardized, batch-produced inventory for non-standard configurations. Because every custom ironworker punch and die is custom-machined to individual blueprints, we enforce strict print-to-part compliance tracking instead of generic automated sampling.
100% Independent Dimensional Gaging: Technicians inspect every finished tool piece on specialized multi-hole calibration plates to verify parallel seating, alignment, and coordinate dimensions before wooden crate packing.
Certified Tool Steel Inspection: We trace metallurgical purity by running spectral composition tests on incoming blanks, ensuring all source materials strictly meet international ASTM standards.
Microstructure Micro-Hardness Calibration: Following multi-stage atmosphere-controlled vacuum quenching, we execute Rockwell hardness testing across different sections of the tool to verify a stable metallurgical base.
4. Frequently Asked Questions
Q1: Why does Premium DC53 deliver a lower long-term TCO for custom shapes despite its higher upfront cost?
We multi-stage vacuum quench and temper our Premium DC53 blanks to achieve optimal microstructure uniformity. This precise thermal treatment delivers double the matrix toughness of standard D2 steel, stopping sudden edge fracture and corner cracking on complex, asymmetric, or non-standard punch shapes under severe machine stress. For mass production where tool-change downtime balances the majority of field costs, DC53 significantly extends service runs.
Q2: Can I use low-cost 9CrSi or GCr15 punches for occasional 15 mm heavy plate non-standard cutting?
Yes. While we metallurgically engineer our entry-level steels for light profiles under 5 mm, they support occasional heavy-gauge operations up to 15 mm on high-tonnage machines. However, forcing entry-level steel through 15 mm sections drives immediate frictional wear and thermal load, dropping the sharpening interval down to 500–1,000 strokes. For continuous heavy-gauge runs, we advise upgrading to DC53 to maintain critical hole tolerances.
Q3: How do ALAS custom profile dies optimize shearing edges and eliminate secondary deburring?
We wire-cut and precision-grind custom punch-and-die sets to lock matching tolerances within ±0.02 mm. We coordinate specialized unilateral clearances (typically 4%–8% of your exact feedstock thickness) based on your provided blueprints. This tight physical fit guarantees clean, tear-free shear borders, keeping burr formation within structural welding specifications.
Q4: What are your real-world manufacturing lead times for non-standard blueprints?
We execute custom modifications on standard stock blanks within 10 working days. For fully bespoke structures, complex stepped shoulders, or obsolete reverse-engineered components, we complete production and inspection within 15 to 20 working days from final CAD or 3D STEP drawing verification.
Q5: What limits your factory warranty terms for custom tooling lines?
We provide a 1-month warranty for 9CrSi/GCr15 items and a 3-month factory warranty for both D2 and premium DC53 series. We issue full product replacement for any structural cracking or splitting caused directly by verified raw material flaws or heat-treatment stress. We exclude normal frictional wear, incorrect die clearance settings, or machine tonnage overloading from coverage.
Contact the ALAS engineering team today for a non-standard print-to-part blueprint audit or a factory-direct wholesale quote on premium D2 (58-60 HRC) and double-toughness DC53 (58-62 HRC) custom punches and dies!
Nanjing Alas International Co., Ltd. is a professional industrial tooling manufacturer focused on shear blades, bending dies, shredder blades, and custom wear parts. We offer full application engineering, material selection, setup guidance, and after-sales support to global customers. Tell us your requirements, and our engineering team will provide professional solutions for blade specification, tool life optimization, and cost-effective production.
In the world of industrial fabrication, machine uptime and cutting precision are everything. At ALAS, we believe that tooling performance begins with metallurgical precision. Whether you are punching thick structural steel or performing heavy-duty shearing, your ironworker requires dies that can wit
This guide optimizes industrial shredder blades lifespan through proper metallurgy selection and lifecycle maintenance. Aligning premium alloys like D2, DC53, and H13 with specific plastic or metal feedstocks, paired with precise H7-grade tolerance calibration and proactive regrinding, can reduce aggregate tooling costs by 20% to 40% while maximizing processing ROI.
Comprehensive Guide to Steel Rebar: Global Grades, Specifications, Applications and Professional Processing AccessoriesKey TakeawaysUpdated Global Construction Standard: China’s latest GB 1499-2024 national standard has fully phased out traditional HPB300 plain rebar and officially promoted high-yie
Subscribe
Sign up for our newsletter to receive the latest news.